Hi,
I´m setting up a Radian Pro with GP1 (seems to work fine now, thanks to Rainer and Tom!). I would like to have the possibility to control both aileron servos separately in manual mode for mixing air brake (butterfly) and other things... but I can´t get it to work.
I connected ESC, 2 x aileron, rudder, and elevator from RC via PWM to GP, the servos are connected as described in Gluonconfig (1,2: aileron, 3: elevator, 4: ESC, 5: rudder). As Output Mix I tried "Aileron" and "Aileron-flaperons on Yaw" (what means "roll stabi"?).
But both aileron servos are controlled by just one RC-channel, so no mixing is possible.
Is there any solution?
Thanks,
Chris