Good evening,
While using Gluonpilot v2 with Xbee 2.4 Ghz I have problems using telemetry.
The main issue is that, in the majority of cases, I cannot write a flightplan to the board using Xbee(I can Read from the Gluonpilot V2 but I cannot Write/burn/Auto-sync..).
It is very frustrating that i am going to the field and try to make some modifications on the flightplan uploaded from home and it is not working.
Today for example, the flightplan loaded from home was not on the wing direction and to change it it took a lot of time (several restarts of the laptop, multiple open/close of the groundstation, powered several times the autopilot....).
Can you advise me what to do in these cases ? How to debug the issue, what to follow,measure?
Thank you,
Alex