Hello together
i like to know which values i need to increase to get better reaction from the plane at stabilizing mode.
I need at moment full stick movement for fly a wide soft circle only
do i need a higher i or d values for this ?
are this values for stick influence ?
the maximum Pitch and Roll Angle i have setup to 45° but i not reach this level by stick under stabilizing
from the Mikrokopter i know it like this, there are PD values for the Gyros and one setup field for PD leverage by Sticks
and one other question
i never get a motor - power control at stabilizing or Auto Mode flight, which hook i had forgotten to set ?
it is only flying by manual throttle
and last but not least perhaps an idea for the new Gluonpilot Boards
is it possible to build in a buzzer for get Sat Fix and status feedback or to make a layout for solder some wires, to extend the LED more easy ? i can doe this at my board self, but perhaps only a idea for a newer version
i use not every time a Notebook outdoor and i get then no feedback form the build in Gluon
thanks for a short hints
regards
Chris
P.S. perhaps one last but not least question
can you give me pelase the Skywalker PID etc. setting values ?
thank you very much