Hi,
I've got a test setup where I have one standby circle setup at 100m height with 100m radius. I've then with the same center got a decent circle setup at 60m height and 80m radius. When going from the standby to the circle the fuselage on my sky walker broke as the rate of decent was so big. I'd done smaller tests before of like 20m and I thought I'd changed the configuration in "Advanced" - "Control" - "Pitch between" and I changed to -20 -> +20. Maybe even this was too high but is this the correct place to change it and what is the relationship between this and the stabalise mode rate of climb and decent which both seem to be much smaller and actually a bit too small and so I'd like to increase the rate in stabalise mode but decrease it in autopilot.
Thanks,
Tim.