Climb - Auto Throttle

All questions related to the configuration tool and groundstation

Moderator: lukasz

Climb - Auto Throttle

Postby spinner » Mon Jul 22, 2013 4:36 pm

Hi,

I'm unsure of the sequence of how this should all work. At the end of my "Start" block which is initialized as the Gluonpilot is initialized I have a "Climb" statement. At the moment this doesn't seem to be triggering the throttle as other commands like Circle which sets the throttle as the globally defined cruise level and Flare which allows you to override this level and I can define at zero. What I'd like is to have a separate "Start" or "Init" as a system initialize so setting the battery alarm response and then have a "TakeOff" Block that is entered by the user using the GCS.

Thanks,

Tim.
spinner
 
Posts: 19
Joined: Sat Jul 06, 2013 8:24 pm

Re: Climb - Auto Throttle

Postby Tom » Tue Jul 23, 2013 7:41 am

Hi Tim,

I don't really understand what you are asking.
You are free to define your navigation as:
1. BLOCK(Init)
2. SetBatteryAlarm or whatever
...
BLOCK(Takeoff)
CLIMB
....
User avatar
Tom
Site Admin
 
Posts: 1016
Joined: Fri Nov 13, 2009 6:27 pm
Location: Belgium

Re: Climb - Auto Throttle

Postby DoreMon » Tue Oct 21, 2014 9:25 am

I can define at zero. What I'd like is to have a separate "Start" or "Init" as a system initialize so setting the battery alarm response and then have a "TakeOff" Block that is entered by the user using the GCS.
Derry
DoreMon
 
Posts: 1
Joined: Tue Oct 21, 2014 8:58 am

Re: Climb - Auto Throttle

Postby fba » Thu Oct 30, 2014 9:49 pm

I will share an example set-up for you ASAP. Not easy on the phone:-)
Francisco
User avatar
fba
 
Posts: 47
Joined: Sun Jan 06, 2013 9:13 pm
Location: Spain


Return to Software

Who is online

Users browsing this forum: No registered users and 3 guests

cron