Hi Jamie,
I'm anxious too! Unfortunately, as this is a project startup and I'm still learning everything about batch production, there have been some delays. I was hoping myself to have everything by the beginning of December, but this isn't going to happen. Let me explain why:
- Thanksgiving in the US caused 3 days delay.
- Sending with fedex from the US straight to Bulgaria was a bad idea: fedex can't do the customs themselves there. So it had to wait for some governement office to do the clearing. Delay: 9 days.
- The assembler seems to be really busy this end of the year. Delay (so far): 5 days
- Upcoming Christmas holidays. Delay: approx. 2 weeks.
All this to explain that my timing was way too optimistic... Let it be a good lesson for myself
We need to keep in mind that all this is a learning process, and it will go better every time!
Thanks again everybody who has faith in this project! We will get there, but I'm afraid it will be January 2010 instead of December 2009.
On the bright side: the configuration code & windows configuration application and a lot of other coding will be done by the time the modules reach you. Prepare that quadrocopter or UAV frame
Tom