Hello Julio,
Could you be a little bit more specific about the problem?
Tom
Moderator: lukasz
julioall wrote:I found a way to tag the images manually. Actually, the tagging is not working properly for Pix4D Mapper.
Here is the result I got of this recently cultivated potato crop of 92 Ha:
julioall wrote:Sure, here is my setup:
Additionally, how do you calibrate your servos with GP2? I am building a new wing and seems like I lost that particular knowledge since I am having issues matching GP2 with the Tx.
This is what I do: I level the aircraft on autopilot mode and align the servos to their neutral position and until here everything is working OK. The issues arise when you go to manual mode then the right aileron changes position dramatically upwards but the left aileron keeps its neutral position. There is no trim on the Tx. I am thinking on changing the neutral position of the right servo but the funny thing is that when I attached another semiwing (right) that is used on another aircraft (same setup but older), same thing happens.
Any suggestions?
kempo wrote:
Regarding the servo setup/trim here are the steps followed by me :
- install the autopilot on the wing making sure that it is at much as "leveled" as possible;
- in manual mode trim the servo in order to have the desired behavior;
Users browsing this forum: No registered users and 10 guests