Tom, the 3D is looking very good!
As update from my side , I have made lot of flights in the past days and I think that I have found a potential improvement. Here the situation: with the battery that I have I can do a flight of 13km length/12 minutes flight time/ 0.5 square kilometer covered area, but due to the fact that I do not know the length/surface of the theoretical survey mission I had to cancel the survey before to arrive to the end ( wrong estimation of the survey area)- the survey area was bigger than I estimated .
In this case I think that could be done a GS software improvement : on the Build route window, to have an option to build multiples survey blocks according with a condition. For example , the area covered by the theoretical survey is 1 square km, on the Build route window I could split the “big area” in survey blocks of 0.5 square km so as result I will have 2 Blocks : first to be used with first battery, second survey mission ( to start where first stopped) to be used using the second battery and so on. Like this it will be much easier in terms of survey planning, time spent to prepare the flights, overall view of the survey.
What do you think , it could be implemented? For all these things / proposals would be nice to have more opinions, feedback of the persons that are using Gluonpilot for photomapping
.
Thank you.