Tom wrote:You could use the analog input (pin hole on the bottom left of ic number 16 in this drawing: http://www.gluonpilot.com/wiki/Hardware_v0.1n)
or use a chip like this: http://www.sparkfun.com/products/8636 (I2C would be better than SPI)
Hi Tom,
Thanks for the input. Maybe I will pass on the airspeed sensor for now until I receive the 3.3 v version.
Do you have code to enable the magnetometer on the GLUON I2C port ? I wouldn't mind testing it!
Thanks,
Olivier