Page 1 of 1

New fw on GP1 board

PostPosted: Tue May 20, 2014 6:13 pm
by icebear
Hi Tom,

Summer is already here in south Sweden and I have been busy doing some flying after a looong winter break... :(

I was thinking about tesing the lastest 10.4 BETA fw with one of my "old" GP1 boards.
Do you see any problem with that if I do some proper flight testing first...

I dont want to miss the annual "Lighthouse trip" :) which is coming up soon and since I had an issue (lock-up of fw during flight) with the GP1 and the last fw verison for the GP1 I thought it would be good to try the newer fw.

What do you recommend?

Thanks,

Björn

Re: New fw on GP1 board

PostPosted: Wed May 21, 2014 9:57 am
by Tom
Hello Björn!

Didn't you also have a GP2 board?

I don't test GP1 myself anymore, but the hardware is similar. It should work but I would propose to do some tests with regard to the correct working of the IMU in flight since this is the main thing that changed.

Tom

Re: New fw on GP1 board

PostPosted: Fri May 23, 2014 1:53 pm
by icebear
Hi Tom,

Thanks for your reply!

Yes, I have in fact 2 GP2 boards but they are used in other planes and the two GP1 boards I have are in the Glider wing and the Funjet LIght setups.

SO, if the latest fw works fine in a test, then it should be as stable as with GP2 hardware?

Will do some tests and report back!

/Björn