Rudder issue on Stabilized mode

Here is the place for all your dsPic or autopilot questions.

Moderator: lukasz

Rudder issue on Stabilized mode

Postby fba » Tue Apr 29, 2014 6:49 am

Hello,
I have not flied for two months. Now I had an issue with rudder on Stabilized mode, the servo doesn´t move on Stabilized but works well on Manual mode. I have reload the firmware (0.10 beta 4) and my setup is Aileron for a trainer plane. I only made one chage on my board before the issue emerge , join the jumper to supply the FTDI connector for Xbee but I had removed and it no fix the issue. Before this two months all works well.

Is there other people who have the same issue or it´s a winter problem, :-) only on my board?.
The rudder on Stabilized mode is very helpful to land on narrow trails.

Thanks
Francisco
User avatar
fba
 
Posts: 47
Joined: Sun Jan 06, 2013 9:13 pm
Location: Spain

Re: Rudder issue on Stabilized mode

Postby Tom » Tue Apr 29, 2014 7:47 pm

Hello Francisco,

Yes now I look at the code it the yaw is no longer passed manually. It was probably changed in the latest beta. Do you still have the issue when you use beta 3?

Tom
User avatar
Tom
Site Admin
 
Posts: 1016
Joined: Fri Nov 13, 2009 6:27 pm
Location: Belgium

Re: Rudder issue on Stabilized mode

Postby fba » Tue Apr 29, 2014 8:41 pm

Hi Tom, I will check 3 beta on Sunday, but i think it worked well before with 0.10 beta 4, not secure
Francisco
User avatar
fba
 
Posts: 47
Joined: Sun Jan 06, 2013 9:13 pm
Location: Spain

Re: Rudder issue on Stabilized mode

Postby fba » Tue Apr 29, 2014 9:22 pm

Tom, I have loaded the 0.10 beta 2, and still remain the issue. I think could be a bug only on my board not on firmware but it is unusual
Francisco
User avatar
fba
 
Posts: 47
Joined: Sun Jan 06, 2013 9:13 pm
Location: Spain

Re: Rudder issue on Stabilized mode

Postby Tom » Sat May 03, 2014 10:49 am

User avatar
Tom
Site Admin
 
Posts: 1016
Joined: Fri Nov 13, 2009 6:27 pm
Location: Belgium

Re: Rudder issue on Stabilized mode

Postby fba » Tue May 06, 2014 9:57 pm

Hi Tom
I have tested at home with 010 beta 5 and now works well

Always grateful
Francisco
User avatar
fba
 
Posts: 47
Joined: Sun Jan 06, 2013 9:13 pm
Location: Spain

Re: Rudder issue on Stabilized mode

Postby Tom » Sat May 10, 2014 7:15 pm

Great :-)
User avatar
Tom
Site Admin
 
Posts: 1016
Joined: Fri Nov 13, 2009 6:27 pm
Location: Belgium


Return to Firmware

Who is online

Users browsing this forum: No registered users and 2 guests

cron