Gluonpilot

Hello,
I have not flied for two months. Now I had an issue with rudder on Stabilized mode, the servo doesn´t move on Stabilized but works well on Manual mode. I have reload the firmware (0.10 beta 4) and my setup is Aileron for a trainer plane. I only made one chage on my board before the issue emerge , join the jumper to supply the FTDI connector for Xbee but I had removed and it no fix the issue. Before this two months all works well.

Is there other people who have the same issue or it´s a winter problem, only on my board?.
The rudder on Stabilized mode is very helpful to land on narrow trails.

Thanks

Hello Francisco,

Yes now I look at the code it the yaw is no longer passed manually. It was probably changed in the latest beta. Do you still have the issue when you use beta 3?

Tom

Hi Tom, I will check 3 beta on Sunday, but i think it worked well before with 0.10 beta 4, not secure

Tom, I have loaded the 0.10 beta 2, and still remain the issue. I think could be a bug only on my board not on firmware but it is unusual

Hello,
Does beta5 fix your problem?
https://drive.google.com/folderview?id= ... sp=sharing

Hi Tom
I have tested at home with 010 beta 5 and now works well

Always grateful

Great