Hello everybody:
I went yesterday to fly with the GP1 and I had weird behaviour with the Auto Throttle. It was set in auto mode fully working but a few minutes after taking off and flying in navigation mode I noticed that something was wrong. The Auto Throttle changed into manual and I had to use the stick to control the motor.
I landed and checked the config and it says Manual mode and all the params 0 (min, cruise and max). I changed again to auto mode with my custom params, write, burn, unplug and plug the battery and check the config and it was OK. Then a test on the ground and working.
After that another flight and it happened the same, in the middle of the flight after several minutes the auto throttle quit working and on the ground the config says manual modes and all the params 0 again. I made another 4 flights and in all of then happened the same sometimes a few minutes after taking off and sometimes in less than a minute.
Any idea?.
Thanks.