Re: Software version to use motor controls
Posted: Tue Nov 27, 2012 7:15 am
I don't own a spectrum system but took a look at the manual and it looks that ar500 has a configurable failsafe:
http://www.google.com/url?sa=t&source=w ... Si4Ri52MdQ
You need to configure rx to switch AP or as Tom suggested throttle to 900 or below when in failsafe.
After RC signal is lost rx will switch to failsafe and set GP to AP.
You would need to do some tests before flight.
http://www.google.com/url?sa=t&source=w ... Si4Ri52MdQ
You need to configure rx to switch AP or as Tom suggested throttle to 900 or below when in failsafe.
After RC signal is lost rx will switch to failsafe and set GP to AP.
You would need to do some tests before flight.