Sevos not working
Posted: Thu May 20, 2010 9:45 am
Hi,
I'm configuring the Gluonpilot "from scratch" and I cannot control the servos neither from the transmitter of with the Gluonpilot itself (5V available and pulse=2,5mS)
What I did:
- "RC Input" : after configuration, the "burn" crashed systematically the Gluonconfigurator (laste version downloaded on 16/05). I found a workaround : upload the funjet.gcf configuration and it got to work.
- "servos" : "servo neutral ... manual mode..." is ticked, but the tick box is disabled and I cannot change this. The value for all the servos is "-1". Since the neutral value should be taken a startup, I tried to start in "manual", "stabilised"... mode but without success.
- GPS works and is locked (EB85 38400 Bauds). When exporting to .kml, I got the same kind of crash. See below.
Any Idea?
MArc
: See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.
************** Exception Text **************
System.NullReferenceException: Object reference not set to an instance of an object.
at Gluonpilot.ConfigurationFrame._button_datalog_kml_Click(Object sender, EventArgs e)
at System.Windows.Forms.Control.OnClick(EventArgs e)
at System.Windows.Forms.Button.OnClick(EventArgs e)
at System.Windows.Forms.Button.OnMouseUp(MouseEventArgs mevent)
at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ButtonBase.WndProc(Message& m)
at System.Windows.Forms.Button.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
I'm configuring the Gluonpilot "from scratch" and I cannot control the servos neither from the transmitter of with the Gluonpilot itself (5V available and pulse=2,5mS)
What I did:
- "RC Input" : after configuration, the "burn" crashed systematically the Gluonconfigurator (laste version downloaded on 16/05). I found a workaround : upload the funjet.gcf configuration and it got to work.
- "servos" : "servo neutral ... manual mode..." is ticked, but the tick box is disabled and I cannot change this. The value for all the servos is "-1". Since the neutral value should be taken a startup, I tried to start in "manual", "stabilised"... mode but without success.
- GPS works and is locked (EB85 38400 Bauds). When exporting to .kml, I got the same kind of crash. See below.
Any Idea?
MArc
: See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.
************** Exception Text **************
System.NullReferenceException: Object reference not set to an instance of an object.
at Gluonpilot.ConfigurationFrame._button_datalog_kml_Click(Object sender, EventArgs e)
at System.Windows.Forms.Control.OnClick(EventArgs e)
at System.Windows.Forms.Button.OnClick(EventArgs e)
at System.Windows.Forms.Button.OnMouseUp(MouseEventArgs mevent)
at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ButtonBase.WndProc(Message& m)
at System.Windows.Forms.Button.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)