source code for revised RTOS pilot - v 0.51

Here is the place for all your dsPic or autopilot questions.

Moderator: lukasz

Re: source code for revised RTOS pilot - v 0.51

Postby Tom » Sun Jan 02, 2011 11:20 pm

Good remark Mitch, I forgot about that... But since manual mode works, I guess the TurboPWM is not an issue.
User avatar
Tom
Site Admin
 
Posts: 1016
Joined: Fri Nov 13, 2009 6:27 pm
Location: Belgium

Re: source code for revised RTOS pilot - v 0.51

Postby TheBoD » Mon Jan 03, 2011 5:13 pm

Tom, thanks for the feedback on the PI&D values. I have re-read the wiki and so will try various values.

Mitch, thanks for your warnings on the servos. Although they are just some old bench ones I have I have updated the code to monitor the servo output values via the Gluonconfig program instead of sending the signals to the servos.

Once I get the feel for how the various PID values affect the outputs then I will switch to the using the speed controllers and test the outputs on the bench setup.
TheBoD
 
Posts: 37
Joined: Mon Dec 07, 2009 8:45 pm

Previous

Return to Firmware

Who is online

Users browsing this forum: No registered users and 4 guests

cron