navigation proplem

[Tom]

Yes, the circle radius depends on (1) the roll angle and (2) the speed

There is no limit. But in practice your plane can not continuously fly at a roll angle of 45 degrees (when the max roll angle is 45 degrees). 20 to 30 degrees (+10 degrees margin for correcting errors and wind gusts) is more realistic.

[Koaxpilot]

when i save and burn the flight plan musst i restart the pilot ?

[Tom]

Yes (I'll change that in the next version)!

[Koaxpilot]

ok

than letz go to the next test fly

[Koaxpilot]

today i have my second fly .
but it works not realy , wenn i but on the navigation mode the plane turn araund and fly ever to the same site but never a circel .

here you can see a picture off the flight track


i have juse this flight plan :
Circel_REL : 0,0,50,25
GOTO 1

i have save and burn the flight plan restart the plane an start it , wenn i make the navigation mode on the plane turn araund and fly , but doesnt com back

[Tom]

Can you send the XML?

[Koaxpilot]

jes
you have a email wife the xml

[Tom]

Is it possible you started with "CLIMB(40)", but your plane never reached 40 meters?

[Koaxpilot]

no , at the first test i have it test but it dont work .
but today i´m only have test this flight plan :
Cricel_REL : 0,0,50,15
GOTO_1

but i have a ideer , musst i clear the flight plan from the last fly ?
because i have only save and burn the new flight plan

[Tom]

I think you were using the old flight plan...

It is always a good idea to click "Reload" (from flash) and "Read" to check the correct flightplan is saved on the module.

I need to go now, but I'll take another closer look at it tomorrow!